MEDLINE INDUSTRIES COMP V35-857-35 12v AGM VMAX Scooter & Wheelchair battery

VMAX V35-85712-Volt 35Ah AGM Deep CycleHigh Performance BatteryVoltage: 12 VoltCapacity(Amp Hours @20-Hr Rate): 35AhRC (min): 75Cold Cranking Amps: 300Marine Cranking Amps: 390Terminals: 6mm (included)Dimensions (inches): 7.7″L x 5″W x 6.1″HWeight: 25lbCharging Current: 3A-15A (a smart charger is recommended)Charging Voltage: 14.4V-14.9VFloat Voltage: 13.5V-13.8VFeatures:AGM Electrolyte Suspension SystemMaintenance free OperationNo Dangerous Fumes or GasesFast Charge Delivery CapabilitiesCustom Built Military Grade AlloysExtremely Low Self Discharge RateApproved for Mobile, Maritime and Air TravelExtreme Vibrations, Heat and Weather resistantSealed, Non-Spillable, Non Hazardous ConstructionMaximum Power Density and Deep Cycle CapabilitiesCharging Options:Smart / Microprocessor controlled charger.Alternator: 14V-15V.Solar Panel: 65W-200W.Charge Controller: 7A-30A.Operating Temperature Range:Discharge: -4~140FCharge: 14~140FStorage: -4~140FTemperature Compensation:Cycle use: -30mV/C per CellStandby use: -20mV/C per CellUPC: 760921777961BCI Group Code: U1 (+ on L.H.S. & – on R.H.S)All VMAXTANKS AGM batteries feature:Sealed ConstructionThe unique construction and sealing techniques of VMAX tanks guarantee leak proof operation in any position with no adverse effect to capacity or service life. VMAX tanks are classified as non-spill able, non-hazardous, dry batteries making them NOT restricted for Surface, Maritime and Air Transport.Electrolyte Suspension systemVMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte. No silica gels or any other contaminants are used.Maintenance Free OperationThere is no need to check specific gravity of the electrolyte or add water to VMAXTANKS™ during float service life.Reliable, Rugged ConstructionThe extra strong ABS container reduces case bulging and plate warping, ensuring long life and high performance.Low Pressure Valve Regulated SystemAll VMAXTANKS™ are equipped with safety release valves, designed to operate between 0.98-196.1kpa and automatically reseal. Hence, there is never an excessive accumulation of gas within the battery.Heavy Duty Military Grade GridsHeavy duty lead tin alloy grids provide an extra margin of performance and service life in either float or cyclic applications, even after repeated over discharges.Cyclic Service LifeVMAX is known to deliver one of the highest numbers of discharge / recharge cycles. Depending on the use and average depth of discharge it can offer an average of:Number Of CyclesDepth of Discharge300100%60075%90050%150025%3500+10%Float Service LifeVMAXTANKS™ have an expected life span of 8 to 10 years in float service applications.Low Self DischargeThe self discharge rate of the new VMAX tanks at room temperature is approximately 1-2% of rated capacity per month (compared to 2-3% for most other AGM batteries and 15-20% for Lead Acid batteries).Operating TemperatureVMAXTANKS™ may be operated over a broad range of ambient temperatures.Ultra Low ResistanceVMAXTANKS™ Ultra Low Resistance make it up to 99% efficient (compared to 85-95% as in Lead Acid Batteries and 97% in most other GEL and AGM batteries).Higher Power DensityA special assembly technology is used to enhance power density to a considerable level.Don’t settle for an average Lead Acid Battery, upgrade to a VMAX CHARGE TANK premium AGM deep cycle battery

Pride Mobilty QUANTUM 1107 Comp VMAX V35-857 AGM Wheelchair HICap 35A U1 Battery

VMAX V35-85712-Volt 35Ah AGM Deep CycleHigh Performance BatteryVoltage: 12 VoltCapacity(Amp Hours @20-Hr Rate): 35AhRC (min): 75Cold Cranking Amps: 300Marine Cranking Amps: 390Terminals: 6mm (included)Dimensions (inches): 7.7″L x 5″W x 6.1″HWeight: 25lbCharging Current: 3A-15A (a smart charger is recommended)Charging Voltage: 14.4V-14.9VFloat Voltage: 13.5V-13.8VFeatures:AGM Electrolyte Suspension SystemMaintenance free OperationNo Dangerous Fumes or GasesFast Charge Delivery CapabilitiesCustom Built Military Grade AlloysExtremely Low Self Discharge RateApproved for Mobile, Maritime and Air TravelExtreme Vibrations, Heat and Weather resistantSealed, Non-Spillable, Non Hazardous ConstructionMaximum Power Density and Deep Cycle CapabilitiesCharging Options:Smart / Microprocessor controlled charger.Alternator: 14V-15V.Solar Panel: 65W-200W.Charge Controller: 7A-30A.Operating Temperature Range:Discharge: -4~140FCharge: 14~140FStorage: -4~140FTemperature Compensation:Cycle use: -30mV/C per CellStandby use: -20mV/C per CellUPC: 760921777961BCI Group Code: U1 (+ on L.H.S. & – on R.H.S)All VMAXTANKS AGM batteries feature:Sealed ConstructionThe unique construction and sealing techniques of VMAX tanks guarantee leak proof operation in any position with no adverse effect to capacity or service life. VMAX tanks are classified as non-spill able, non-hazardous, dry batteries making them NOT restricted for Surface, Maritime and Air Transport.Electrolyte Suspension systemVMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte. No silica gels or any other contaminants are used.Maintenance Free OperationThere is no need to check specific gravity of the electrolyte or add water to VMAXTANKS™ during float service life.Reliable, Rugged ConstructionThe extra strong ABS container reduces case bulging and plate warping, ensuring long life and high performance.Low Pressure Valve Regulated SystemAll VMAXTANKS™ are equipped with safety release valves, designed to operate between 0.98-196.1kpa and automatically reseal. Hence, there is never an excessive accumulation of gas within the battery.Heavy Duty Military Grade GridsHeavy duty lead tin alloy grids provide an extra margin of performance and service life in either float or cyclic applications, even after repeated over discharges.Cyclic Service LifeVMAX is known to deliver one of the highest numbers of discharge / recharge cycles. Depending on the use and average depth of discharge it can offer an average of:Number Of CyclesDepth of Discharge300100%60075%90050%150025%3500+10%Float Service LifeVMAXTANKS™ have an expected life span of 8 to 10 years in float service applications.Low Self DischargeThe self discharge rate of the new VMAX tanks at room temperature is approximately 1-2% of rated capacity per month (compared to 2-3% for most other AGM batteries and 15-20% for Lead Acid batteries).Operating TemperatureVMAXTANKS™ may be operated over a broad range of ambient temperatures.Ultra Low ResistanceVMAXTANKS™ Ultra Low Resistance make it up to 99% efficient (compared to 85-95% as in Lead Acid Batteries and 97% in most other GEL and AGM batteries).Higher Power DensityA special assembly technology is used to enhance power density to a considerable level.Don’t settle for an average Lead Acid Battery, upgrade to a VMAX CHARGE TANK premium AGM deep cycle battery

ELECTRIC MOBILITY COMP V35-857 12v AGM VMAX Scooter & Wheelchair battery

VMAX V35-85712-Volt 35Ah AGM Deep CycleHigh Performance BatteryVoltage: 12 VoltCapacity(Amp Hours @20-Hr Rate): 35AhRC (min): 75Cold Cranking Amps: 300Marine Cranking Amps: 390Terminals: 6mm (included)Dimensions (inches): 7.7″L x 5″W x 6.1″HWeight: 25lbCharging Current: 3A-15A (a smart charger is recommended)Charging Voltage: 14.4V-14.9VFloat Voltage: 13.5V-13.8VFeatures:AGM Electrolyte Suspension SystemMaintenance free OperationNo Dangerous Fumes or GasesFast Charge Delivery CapabilitiesCustom Built Military Grade AlloysExtremely Low Self Discharge RateApproved for Mobile, Maritime and Air TravelExtreme Vibrations, Heat and Weather resistantSealed, Non-Spillable, Non Hazardous ConstructionMaximum Power Density and Deep Cycle CapabilitiesCharging Options:Smart / Microprocessor controlled charger.Alternator: 14V-15V.Solar Panel: 65W-200W.Charge Controller: 7A-30A.Operating Temperature Range:Discharge: -4~140FCharge: 14~140FStorage: -4~140FTemperature Compensation:Cycle use: -30mV/C per CellStandby use: -20mV/C per CellUPC: 760921777961BCI Group Code: U1 (+ on L.H.S. & – on R.H.S)All VMAXTANKS AGM batteries feature:Sealed ConstructionThe unique construction and sealing techniques of VMAX tanks guarantee leak proof operation in any position with no adverse effect to capacity or service life. VMAX tanks are classified as non-spill able, non-hazardous, dry batteries making them NOT restricted for Surface, Maritime and Air Transport.Electrolyte Suspension systemVMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte. No silica gels or any other contaminants are used.Maintenance Free OperationThere is no need to check specific gravity of the electrolyte or add water to VMAXTANKS™ during float service life.Reliable, Rugged ConstructionThe extra strong ABS container reduces case bulging and plate warping, ensuring long life and high performance.Low Pressure Valve Regulated SystemAll VMAXTANKS™ are equipped with safety release valves, designed to operate between 0.98-196.1kpa and automatically reseal. Hence, there is never an excessive accumulation of gas within the battery.Heavy Duty Military Grade GridsHeavy duty lead tin alloy grids provide an extra margin of performance and service life in either float or cyclic applications, even after repeated over discharges.Cyclic Service LifeVMAX is known to deliver one of the highest numbers of discharge / recharge cycles. Depending on the use and average depth of discharge it can offer an average of:Number Of CyclesDepth of Discharge300100%60075%90050%150025%3500+10%Float Service LifeVMAXTANKS™ have an expected life span of 8 to 10 years in float service applications.Low Self DischargeThe self discharge rate of the new VMAX tanks at room temperature is approximately 1-2% of rated capacity per month (compared to 2-3% for most other AGM batteries and 15-20% for Lead Acid batteries).Operating TemperatureVMAXTANKS™ may be operated over a broad range of ambient temperatures.Ultra Low ResistanceVMAXTANKS™ Ultra Low Resistance make it up to 99% efficient (compared to 85-95% as in Lead Acid Batteries and 97% in most other GEL and AGM batteries).Higher Power DensityA special assembly technology is used to enhance power density to a considerable level.Don’t settle for an average Lead Acid Battery, upgrade to a VMAX CHARGE TANK premium AGM deep cycle battery

INVACARE COMP VMAX V35-857 AGM WHEELCHAIR HiCAP 35A U1 Battery N51 P7E PWR 9000

VMAX V35-85712-Volt 35Ah AGM Deep CycleHigh Performance BatteryVoltage: 12 VoltCapacity(Amp Hours @20-Hr Rate): 35AhRC (min): 75Cold Cranking Amps: 300Marine Cranking Amps: 390Terminals: 6mm (included)Dimensions (inches): 7.7″L x 5″W x 6.1″HWeight: 25lbCharging Current: 3A-15A (a smart charger is recommended)Charging Voltage: 14.4V-14.9VFloat Voltage: 13.5V-13.8VFeatures:AGM Electrolyte Suspension SystemMaintenance free OperationNo Dangerous Fumes or GasesFast Charge Delivery CapabilitiesCustom Built Military Grade AlloysExtremely Low Self Discharge RateApproved for Mobile, Maritime and Air TravelExtreme Vibrations, Heat and Weather resistantSealed, Non-Spillable, Non Hazardous ConstructionMaximum Power Density and Deep Cycle CapabilitiesCharging Options:Smart / Microprocessor controlled charger.Alternator: 14V-15V.Solar Panel: 65W-200W.Charge Controller: 7A-30A.Operating Temperature Range:Discharge: -4~140FCharge: 14~140FStorage: -4~140FTemperature Compensation:Cycle use: -30mV/C per CellStandby use: -20mV/C per CellUPC: 760921777961BCI Group Code: U1 (+ on L.H.S. & – on R.H.S)All VMAXTANKS AGM batteries feature:Sealed ConstructionThe unique construction and sealing techniques of VMAX tanks guarantee leak proof operation in any position with no adverse effect to capacity or service life. VMAX tanks are classified as non-spill able, non-hazardous, dry batteries making them NOT restricted for Surface, Maritime and Air Transport.Electrolyte Suspension systemVMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte. No silica gels or any other contaminants are used.Maintenance Free OperationThere is no need to check specific gravity of the electrolyte or add water to VMAXTANKS™ during float service life.Reliable, Rugged ConstructionThe extra strong ABS container reduces case bulging and plate warping, ensuring long life and high performance.Low Pressure Valve Regulated SystemAll VMAXTANKS™ are equipped with safety release valves, designed to operate between 0.98-196.1kpa and automatically reseal. Hence, there is never an excessive accumulation of gas within the battery.Heavy Duty Military Grade GridsHeavy duty lead tin alloy grids provide an extra margin of performance and service life in either float or cyclic applications, even after repeated over discharges.Cyclic Service LifeVMAX is known to deliver one of the highest numbers of discharge / recharge cycles. Depending on the use and average depth of discharge it can offer an average of:Number Of CyclesDepth of Discharge300100%60075%90050%150025%3500+10%Float Service LifeVMAXTANKS™ have an expected life span of 8 to 10 years in float service applications.Low Self DischargeThe self discharge rate of the new VMAX tanks at room temperature is approximately 1-2% of rated capacity per month (compared to 2-3% for most other AGM batteries and 15-20% for Lead Acid batteries).Operating TemperatureVMAXTANKS™ may be operated over a broad range of ambient temperatures.Ultra Low ResistanceVMAXTANKS™ Ultra Low Resistance make it up to 99% efficient (compared to 85-95% as in Lead Acid Batteries and 97% in most other GEL and AGM batteries).Higher Power DensityA special assembly technology is used to enhance power density to a considerable level.Don’t settle for an average Lead Acid Battery, upgrade to a VMAX CHARGE TANK premium AGM deep cycle battery

10″ L x 32″ W – EZ-Access® Transitions® Aluminum Angled Entry Threshold Ramp

10″ L x 32″ W – EZ-Access® Transitions® Aluminum Angled Entry Threshold Ramp New Item # TAEP-10 This threshold ramp installs in minutes, thanks to the simple one-piece design. There is no assembly or moveable parts, just set the plate in the desired location and it’s ready for use. These portable aluminum threshold ramps measure 32″wide and are available in three different lengths to accommodate rises up to 1-2/3″ high. EZ-ACCESS TAEP-10 Features: Manufactured from high-strength, lightweight aluminum 700 lb. weight capacity Measures 10″ L x 32″ W and accommodates a maximum rise of 1-1/4″ High-traction grit surface for added safety Single piece design allows for easy placement Measures 10″ x 32″ x 1.625″ overall Weighs 21 lbs ⚠️ — Discount Ramps is your mobility loading, hauling, and transport superstore – providing quality innovative products with the best overall value to get the job done right. Our knowledgeable service and sales mobility experts have years of experience in the industry and look forward to finding the right solution for you to load and secure equipment for travel. Please contact by phone or email for any questions about TAEP-10 wheelchair access landings – thank you! Discount Ramps

Bruno SRE 2010 Chair Lift Parts Replacement Fuse Holder Fits Most Models

Same Day Shipping From USA With Tracking Number Fast N FreeMust Have Your Order In Before 4pm Eastern Time Product DescriptionBruno Chair Lift Charger Replacement Fuse Holder Please check your local laws prior to purchasing. Buyer agrees that they are of legal age to purchase and own this knife in their state. We are a USA seller, offering our products to USA customers only! Why buy from us? Because we care about our customers, and would never sell them anything that wasn’t good enough for our own family. We appreciate every single purchase, and always strive to exceed your expectations! Read our feedback for real testimonials of how we conduct business.

Rubber Curb Ramps for Sidewalks – 2″ Rise Threshold Ramp for Driveway & Wheelcha

Multi-Purpose Use: Perfect for driveways, garages, doorways, sidewalks, warehouses, and loading docks. Easily position and move the ramp for both temporary and permanent needs. Designed for safety and durability, this ramp is perfect for various applications.

Folding Cane – Adjustable Height Walking Stick with T Handle & Wrist Strap

Ideal for individuals of all ages, including the elderly and those with disabilities, this adjustable cane is perfect for both indoor and outdoor use. The ergonomic T-handle design not only reduces wrist pressure but also promotes a secure grip, while the included wrist strap adds an extra layer of safety.

Pink ABDL Adult Diaper Dispenser Hand-Made, Heavy Duty, 3D Printed in PLA Silk

Treat yourself to a little pink sparkle and make every change feel magical!Holds 7 Thick ABDL Diapers – Made in USA! This dispenser can be placed onany flat surface or easilymounted to a wall for maximum versatility.

Hand Socks for Splint (Pack of 10), Stockinette Tubing, Thin Breathable Surgical

The fabric is lightweight and comfortable, making it perfect for wearing under braces, casts, or splints without causing pressure or discomfort. This feature is especially helpful during extended use, ensuring your skin stays fresh and irritation-free.